Garage door spring repair in Calimesa, CA by Goodies Garage Door & Repair

Garage Door Spring Repair in Calimesa, CA | Goodies

August 14, 2026
Veteran-Owned - Same-Day Service - Upfront Pricing - Call (951) 499-5533

Garage Door Spring Repair in Calimesa, CA: Correcting Another Company's Unnecessary Two-Spring Setup

Same-Day ServiceUpfront PricingVeteran-Owned24/7 EmergencyFully Insured
Call (951) 499-5533

A homeowner in Calimesa, California called Goodies Garage Door and Repair about something he had noticed while watching his garage door run: one of the springs above the door was not spinning as the door moved up and down. A torsion spring that does not turn while the door travels is doing exactly nothing - and that observation unraveled a story about work another company had sold him a year earlier.

The homeowner was not dealing with a dead door. It opened and closed. But something was clearly off, and he wanted a professional to look at it before it became an emergency.

What our technician found on 5th Street turned this routine service call into a case study in why who you hire matters.

The Problem We Found

What Was Wrong With the Existing Garage Door?

The door was a 9x7, non-insulated, with windows - and it had two torsion springs on it. That was the first red flag: a door of this size and weight does not call for two springs.

The homeowner explained that about a year earlier he had purchased springs from a different company, and that company told him this door needed two. Our technician tested that claim directly: when we wound the spring that had been sitting unwound, the door became overloaded with lift and rose on its own. That is proof the second spring was never needed - and it revealed why the door had kept working all year: the other company never wound the extra spring they installed. It was dead weight on the tube the entire time.

The spring that WAS doing the work had its own problem: it was an undersized 192x2x20. The correct specification for this door is a 218x1.75x31 at minimum.

What the Customer Wanted

Simple: a door that runs the way it should, and a straight answer about what was actually going on with the spring setup he had paid for. After learning he had been sold an unnecessary second spring that was never even wound, he also wanted the whole system put right - correctly, once.

Our Recommendation

Why We Recommended Correcting the Spring Setup

We recommended returning the door to the configuration it was engineered for: the correct number of springs at the correct specification. Springs are matched to door weight. Too little spring and the opener drags a heavy door; too much spring - as this door demonstrated by lifting on its own - and the door is overpowered, which is its own safety problem. Our guide on whether to replace one spring or two explains how door weight, not sales tactics, drives that decision.

As our technician put it to the homeowner: who you hire matters when it comes to who you let work on your home.

The Goodies Solution

The Correct Spring, Correctly Sized

We installed the proper 218x31 torsion spring setup for this 9x7 door, replacing the undersized 192x2x20 arrangement, and corrected the two-spring configuration the door never needed. The existing LiftMaster chain-drive opener stayed - once the door is balanced to specification, the opener has nothing to fight.

Why We Chose These Components

Why a 218x31 Specification?

The numbers describe the spring wire and length, which set both lift capacity and cycle life. A 218x1.75x31 matches this door weight class, so the door balances properly: stop it anywhere in its travel and it should hold position, neither drifting down nor floating up.

Why Not Two Springs?

Two-spring setups are for heavier doors - larger, insulated, or wood doors where the load justifies splitting it across a pair. On a light 9x7 non-insulated door, a second spring adds cost, complexity, and - if actually wound - dangerous excess lift. This door lifting on its own under two wound springs was the demonstration.

Why We Kept the Opener

The LiftMaster chain drive was healthy. The problem was never the opener - it was the counterbalance it was attached to. We do not replace parts that do not need replacing.

How We Completed the Repair

1. Inspected the full spring setup and identified the unwound second spring. 2. Test-wound it and confirmed the door became overpowered - proving the two-spring setup was wrong for this door. 3. Removed the incorrect, undersized 192x2x20 arrangement. 4. Installed the correct 218x31 torsion spring sized for a 9x7 door. 5. Wound to specification and balanced the door. 6. Verified smooth travel and normal operation with the existing LiftMaster opener.

Photos From This Calimesa Job

Garage door torsion spring inspection in Calimesa CA by Goodies Garage Door and Repair
From this Calimesa spring repair - 9x7 non-insulated door with windows.
Correct 218x31 torsion spring installed on a garage door in Calimesa CA
The corrected setup with the properly sized 218x31 torsion spring.

The Result

The Finished Repair

The door now runs on the spring configuration it was designed for, correctly sized and properly wound - no idle spring riding along on the tube, no undersized spring running past its limits, and no door trying to lift itself. The homeowner also left with something a good repair should always include: an honest explanation of what he had actually been sold the year before.

Project Specifications

SpecificationDetails
LocationCalimesa, CA
ProjectGarage Door Spring Repair / Correction
Door9x7, non-insulated, with windows
FoundTwo springs (one never wound); working spring undersized 192x2x20
Correct spec218x1.75x31 minimum for this door
Installed218x31 torsion spring setup
OpenerExisting LiftMaster chain drive (kept)
Service dateAugust 2026
WarrantyWritten warranty on parts and labor

Why the Customer Chose Goodies Garage Door and Repair

A second opinion that told the truth: the door needed one correct spring, not two. Goodies Garage Door and Repair is veteran-owned and locally operated, fully insured, with upfront pricing, a written warranty on parts and labor, and a 5.0-star Google rating across 220+ reviews.

4,311+repairs
1,270+openers replaced
432+doors installed
5.0★220+ reviews

Related Garage Door Services in Calimesa

Goodies serves Calimesa and the surrounding Pass-area communities with broken spring repair, opener repair, cable repair, and garage door tune-ups, along with nearby Beaumont, Yucaipa, Banning, Redlands, and San Jacinto. For pricing context, see garage door spring repair cost in Riverside County.

Frequently Asked Questions

Does my garage door need one spring or two?

It depends entirely on door weight, not preference. Heavier doors - large, insulated, or wood - split the load across a pair; light single-car doors like this 9x7 typically take one correctly sized spring. Any company that prescribes two springs without weighing the door is guessing or upselling. Our guide on one spring vs two covers this in depth.

Why is one of my garage door springs not spinning when the door moves?

A torsion spring only works when it is wound; winding is what loads it with lifting force. A spring that stays still while the door travels is unwound and contributing nothing - which is exactly what we found on this Calimesa door, where a second spring had been installed a year earlier and never wound at all.

What happens if a garage door has too much spring?

The door becomes overpowered and can lift on its own - which this door did the moment we wound the idle second spring. An overpowered door is a safety issue: it strains the opener in the down direction and can travel unexpectedly.

How do I know if a garage door company is being honest with me?

Ask them to explain the WHY behind any part they recommend, in terms of your specific door - its size, weight, and construction. Spring counts and sizes are physics, not opinion. A second opinion is cheap compared to paying for parts your door never needed.

How much does garage door spring repair cost in Calimesa?

Most torsion spring repairs in the Calimesa area run roughly $200 to $600 installed, depending on spring size, cycle rating, and configuration. The final price depends on your specific door - Goodies quotes upfront in writing before any work begins. See our Riverside County spring cost guide.

Can Goodies fix a spring problem the same day?

Usually, yes - spring work is our most common call and we stock standard sizes. Call (951) 499-5533 and we can typically have a technician out the same day in Calimesa and throughout the Inland Empire.

Not Sure the Last Company Told You the Truth About Your Door?

If your door has a spring that does not spin, feels wrong, or came with an explanation that never quite added up, Goodies Garage Door and Repair will inspect the system and give you a straight answer - upfront pricing, written warranty, no invented parts. Serving Calimesa and homeowners throughout the Inland Empire.

Call (951) 499-5533 - Request an Estimate
blog author avatar

Goodies Garage Door & Repair

Veteran-owned garage door repair serving Beaumont and the Inland Empire. Old-School Service. New-Age Skill.

Back to Blog